External reset
The external reset block provides a signal that can be wired to the external reset input of PID controllers to keep the integrator at reset when the target is not in OPERATING state.
The external reset block provides a signal that can be wired to the external reset input of PID controllers to keep the integrator at reset when the target is not in OPERATING state.
Benoit is an embedded systems expert and the leader of software and firmware developments at imperix. On the knowledge base, he is the author of numerous software reference documents.
The B-Box RCP and B-Board PRO digital controllers hold 4 clock generators, which provide time-bases to use with various peripherals such as the PWMs and…
The DQ-type PLL is a basic Phase-Locked Loop (PLL) used to extract the phase information of three-phase voltages. It operates by minimizing the voltage projected…
The TPI GPI helper block is a wrapper that simplifies the use of the GPI block with the all-in-one programmable inverter (TPI8032 22kW). Simulink GPI…
The ADC block is used to retrieve the measurements from the analog inputs of an imperix controller. This help documentation deals with the software part…
The sin/cos encoder (S/C) block retrieves the Sine and Cosine signals of a sin/cos encoder connected to the Motor Interface. The B-Box RCP supports up…
The PEB block is a simulation model included in the Imperix Power library. It models the imperix half-bridge module PEB8038, PEB8024, and PEB4050 in Simulink…